Displaying Information For Dynamic Ip Source Guard Bindings - Edge-Core ECS4510-12PD Web Management Manual

Figure 214: Configuring Static Bindings for IP Source Guard
To display static bindings for IP Source Guard:
1.
2.
Figure 215: Displaying Static Bindings for IP Source Guard
Displaying
Use the Security > IP Source Guard > Dynamic Binding page to display the source-
Information for guard binding table for a selected interface.
Dynamic IP Source
Guard Bindings Parameters
These parameters are displayed:
Query by
◆
◆
◆
◆
Click Security, IP Source Guard, Static Configuration.
Select Show from the Action list.
Port – A port on this switch.
VLAN – ID of a configured VLAN (Range: 1-4093)
MAC Address – A valid unicast MAC address.
IP Address – A valid unicast IP address, including classful types A, B or C.
– 337 –
Chapter 12
| Security Measures
IP Source Guard