Figure 495: Configuring Protocol Settings For A Stub; Displaying Information On Nssa And Stub Areas - Edge-Core ECS4620-28T Quick Start Manual

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

Information on

NSSA and Stub Areas

Figure 495: Configuring Protocol Settings for a Stub

Use the Routing Protocol > OSPF > Area (Show Information) page to protocol

information on NSSA and Stub areas.

These parameters are displayed:

Process ID – Process ID as configured in the Network Area configuration screen

Area ID – Identifier for a not-so-stubby area (NSSA) or stub.

SPF Runs – The number of times the Shortest Path First algorithm has been run

for this area.

ABR Count – The number of Area Border Routers attached to this area.

ASBR Count – The number of Autonomous System Boundary Routers attached

to this area.

LSA Count – The number of new link-state advertisements that have been

LSA Checksum Sum – The sum of the link-state advertisements' LS checksums

contained in this area's link-state database.

Web Interface

To display information on NSSA and stub areas:

Click Routing Protocol, OSPF, Area.

Select Show Information from the Action list.

Select a Process ID.

Configuring the Open Shortest Path First Protocol (Version 2)

| Unicast Routing

Show Quick Links

Table of Contents