Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

QR Code Length 1, Length 2 Programming Instructions

If QR Code Length Control is set to Fixed-Length decoding, this feature speci-
fies QR Code first fixed length. If QR Code Length Control is set to Variable-
Length decoding, this feature specifies the minimum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
03DB(CR)
Set QR Code Length 2
Default setting for this feature = 0A96 (length = 2710)
264
Length 1 is the minimum label length if in variable length
mode, or the first fixed length if in fixed length mode. Length 2
is the maximum label length if in variable length mode, or the
second fixed length if in fixed length mode. Length includes
NOTE
the barcode' s data characters only. Any value > 2710 will be
considered to be 2710.
Set QR Code Length 1 on page 264
Length 2 on page 264
this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
that represent the desired label length. The selectable range for this
option is 0001 to 2710. Pad all numbers with leading zeros to yield a four-
digit entry (001-02710).
gramming Mode barcode.
below. You'll need to cover any unused barcodes on
Alpha-Numeric Keypad in Appendix C
03DA(CR)
Set QR Code Length 1
Default setting for this feature = 0001
QR Code Length Control
or Set QR Code
Magellan™ 1500i