Qos - Funkwerk bintec R1200 Manual

Hide thumbs Also See for bintec R1200:

Table of Contents

Funkwerk Enterprise Communications GmbH

bintec R1xxx/R3xxx/R4xxx

Traffic Priority

12.1.2 QoS

More and more applications need increasingly larger bandwidths, which are not always

available. Quality of Service (QoS) makes it possible to distribute the available bandwidths

effectively and intelligently. Certain applications can be given preference and bandwidth re-

served for them.

In the Firewall -> Policies -> QoS menu, a list of all QoS rules is shown.

12.1.2.1 New

Choose the New button to set up new QoS rules.

If QoS is not activated for this policy, bear in mind that the data

cannot be prioritised on the sender side either.

A policy with QoS activated is not only used for QoS, but for the

firewall, too. Bear in mind, that traffic that is not explicitly al-

lowed, is blocked by the firewall!

Only for Apply QoS = enabled

Select the priority with which the data specified by the policy is

handled on the send side.

Possible values:

• None (default value): No priority.

• Low Latency: Low Latency Transmission (LTT), i.e. hand-

ling of data with the lowest possible latency, e.g. suitable for

Show Quick Links

Table of Contents