Ip Dhcp Relay Enable - Allied Telesis AT-8000S Series Cli Reference Manual

Allied Telesis
Command Line Interface User's Guide
Command Mode
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DHCP option 82 configuration.
Console(config)# show ip dhcp information option

ip dhcp relay enable

The ip dhcp relay enable Global Configuration mode command enables DHCP relay features on your router. Use
the no form of this command to disable the relay agent features.
Syntax
ip dhcp relay {address|enable}
no ip dhcp relay {address|enable}
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration
User Guidelines
There are no user guidelines for this command.
Example
The following example enables DHCP relay features.
Console(config)# ip dhcp relay enable
Page 72
Not approved by Document Control. For review only.