Magnum Fuel Tank Removal - Polaris Magnum 2x4 Service Manual

FUEL SYSTEM/CARBURETION
Magnum Fuel Tank Removal
Fuel Tank Removal
1. Turn fuel valve to "Off" position.
2. Remove the following items:
Seat
Ignition Key
Side Panels
Fuel Tank Cover
3. Remove cable tie on PVT exhaust duct.
4. Remove the two bolts securing the duct and remove
the duct.
5. Disconnect fuel line from fuel valve and vent line from
top of tank.
6. Remove the two Torx™ screws at the rear of the
headlight pod until they no longer project into the tank
area.
7. Remove the two bolts and spacers from the rear of the
fuel tank.
8. Shift tank and position throttle cable below the PVT air
inlet duct.
9. Pull and hold fuel valve selector lever out to clear fuel
valve.
10. Lift and pull tank back.
11. Rotate rear of tank to left and remove tank.
Be careful not to damage fuel valve.
7/96
4.28
Polaris Industries Inc.