2X4 Front Hub Assembl. - Polaris Magnum 2x4 Service Manual

FINAL DRIVE
2x4 Hub Bearing Service
2x4 Front Hub Disassembly, Cant.
12. Inspect spacer for wear or damage. Measure
length of spacer and replace if worn beyond service
limit or if ends are rounded.
2x4 Front Hub Assembly
1. Pack bearings with Polaris Premium All Season
Grease. Drive one of the bearings into rear of hub
using a 1.180 (46 mm) bearing driver. CAUTION:
Do not
drive on the inner race of the bearing.
2. Coat bearing spacer with grease and install into
hub. Drive other bearing into hub until seated.
3. Install seal into hub (with numbers facing out) until
flush with end of seal bore.
7/96 7.22
Polaris Industries Inc.