Brake Disc Hub Removal - Polaris Magnum 2x4 Service Manual

FINAL DRIVE
6x6 Middle Axle Sprocket Service
17. Inspect sealing surfaces of sprocket hub.
NOTE: When installing a new sprocket, be sure to align
eccentric adjustment access holes in sprockets.
Brake Disc Hub Removal
1. With axle removed, tap spacer, LH bearing housing
and disc hub inward to expose wire retainer clip.
2. Remove wire clip from groove.
3. Slide clip, spacer, O-Ring, bearing housing and disc
hub off LH side of axle.
4. Inspect sealing surface on brake disc hub.
Reverse disassembly procedure to assemble. Be sure
to install rear swing arm bearing housing with grease fit-
ting outward.
10/96 7.28d
Polaris Industries Inc.