Drive Clutch Moveable Sheave - Bushing Installation - Polaris Magnum 2x4 Service Manual

CLUTCHES
Clutch Bushing Removal and Installation
6. Turn sheave and puller barrel together
counterclockwise on puller rod until bushing is
removed.
7. Remove nut from puller rod and set aside.
8. Pull bushing removal tool and adapter from puller rod.
Remove bushing from tool and discard.
Drive Clutch Moveable Sheave - Bushing
Installation
9. Place main adapter (Item 8) on puller.
10. Push bushing into center of sheave on tower side by
hand.
11. Insert installation tool (Item 2) into center of sheave and
with towers pointing away from vise, slide sheave onto
puller rod.
12. Install nut on puller rod and hand tighten. Turn barrel
to apply additional tension if needed.
13. Turn sheave and barrel together counterclockwise
until bushing is seated.
14. Remove nut from puller rod and set aside.
15. Remove sheave from puller.
16. Remove installation tool.
7/96 6.24
Polaris Industries Inc.