Polaris Magnum 2x4 Service Manual page 338

35. Install holder tool in reservoir and push IFP in slowly until
depth gauge contacts reservoir body. Hold IFP with tool
and tighten bleeder screw securely.
36. Drain and clean residual oil from reservoir.
37. Install reservoir cap and retaining circlip.
CAUTION:
Be
sure circlip is in good condition and firmly seated in
groove.
38. Insert the FOXTM Safety Needle and charge with nitrogen
to 200 PSI. Pull the needle straight outward and remove
from the pressurizing valve while holding the pressure
hose on the fitting. Do not insert the needle again to
check pressure as the volume inside the gauge will
reduce pressure in the shock.
39. Install cap screw in pressure valve.
Polaris Industries Inc. 5.35
BODY AND STEERING
FOX™ Shock Service
7/96