FINAL DRIVE
Front Eccentric
Front Eccentric Installation
1 . Align slot in eccentric assembly with tab on frame
and slide eccentric assembly into frame with long
splines to right of machine (grease fitting facing left
side of machine).
NOTE:
Install the sprocket and chain as an assembly
at same time.
NOTE:Do
not
tap or press on eccentric shaft to install
assembly in frame. This may force seal out of housing
and cause premature bearing failure.
2. Rotate eccentric assembly until chain begins to
tighten.
3. Install plastic spacer.
7/96
7.42
Polaris Industries Inc.