Drive Clutch
CLUTCHES
Drive Clutch Disassembly
To maintain proper clutch balance
and belt-to-sheave clearance, be
sure to reinstall original quantity
and thickness washers
~ark w~h
permanent
~~~~~~~~~~~~~~~~~~~~~~~~~
marker before disassembly
Drive Clutch Disassembly
1.
Using a permanent marker, mark the cover, spider,
and moveable and stationary sheaves to verify
balance after assembly. See illustration above.
2.
Install clutch in holding fixture. Remove cover plate
bolts evenly in a criss-cross pattern.
3.
Inspect cover bushing. The outer cover bushing is
manufactured with a Teflon™ coating.
Bushing
wear is determined by the amount of TeflonTM
remaining on the bushing.
Polaris Industries Inc.
6.17
10/96