Starter Motor Installation (Ec38Pl) - Polaris Magnum 2x4 Service Manual

Starter Motor Installation (EC38PL)
1. Loosely assemble support bracket to starter.
NOTE: Bracket bolts must be loose to allow installation of
support bracket to engine bolts.
2. Install a new gasket and place the starter motor in place.
3. Install the starter motor to magneto housing bolt first.
4. Install both support bracket to engine bolts.
5. Tighten all support bracket bolts.
6. Install starter motor cable. Make sure red protective
cover is properly in place.
7. Install rock guard.
8. Install two bolts to starter from inside magneto housing.
9. Install magneto housing.
10. Install all components removed to gain access to
magneto housing.
Polaris Industries Inc.
10.30a
ELECTRICAL
Starter System
10/96