Polaris Magnum 2x4 Service Manual page 134

Engine Removal Preparation, Cont.
16. Starter motor. Note ground cable location. Mark
positive (+) cable mounting angle and remove cable.
17. Remove transmission linkage rods from shift selector
and secure out of the way.
18. Disconnect coolant temp sender wire (where
applicable) .
19. Remove nut, ground cable and washer from the upper
right engine mount.
20. Remove the two upper engine mount plate bolts and
remove the plate and ground cable (where applicable).
21. Remove nut and washer from lower front engine
mount.
22. Loosen nut on slotted rear engine mount plate and
back it out to the end of the stud.
Polaris Industries Inc.
3.9
ENGINE
Engine Removal
7/96