Rear Axle Removal - Polaris Magnum 2x4 Service Manual

FINAL DRIVE
Rear Axle
Rear Axle Removal
1. Stop engine. Place machine in gear and set
parking brake.
2. Loosen rear wheel nuts slightly.
3. Remove both hub caps and cotter pins, and loosen
hub nuts 1-2 turns.
4. Elevate and safely support machine under
footrest/frame area.
CAUTION: Serious injury may result if machine tips
or falls. Be sure machine is secure before beginning
this service procedure. Wear eye protection when re-
moving and installing bearings and seals.
5. Remove wheel nuts and rear wheels.
6. Remove both hub nuts, cone washers, and flat
washers. Remove hubs.
7. Remove rear axle lock nut using 1 3/4" axle nut
wrench.
7/96 7.24
Polaris Industries Inc.