Concentric Swingarm Rear Axle Assembly; Concentric Swingarm Rear Axle Installation - Polaris Magnum 2x4 Service Manual

Concentric Swingarm Rear Axle Assembly
1. (Refer to exploded view on page 7.55). Install
stop ring in groove on left side of axle.
2. Install disc hub assembly on axle. Place axle in a
soft jawed vise. Apply Loctite 262 to threads,
install left axle nut and tighten to 120 ft. Ibs. Install
foam seal and axle nut lock sleeve with taper
toward nut as shown. Install snap ring to retain the
lock sleeve. Slide disc hub seal sleeve and then a
new O-ring onto the axle.
Concentric Swingarm Rear Axle Installation
1. Place brake caliper pivot bushing on stud with
flange inward as shown.
2. Loosely assemble upper and lower brake caliper
mount. Do not tighten at this time.
Polaris Industries Inc.
7.53
FINAL DRIVE
Concentric Swingarm Rear Axle
Ring
Groove
5/98