Polaris Magnum 2x4 Service Manual page 420

Rear Axle Installation
7. Clean axle nut threads with a wire brush. Apply
Loctite 242 to threads and install axle nut. Torque to
150 ft. Ibs. (20.7 kg-m). Rotate axle and check for
smooth operation.
8. Install lock nut and torque to 150 ft. Ibs.
9. Lightly grease splines of axle and install wheel
hubs, flat washers, and cone washers with concave
side facing flat washer.
10. Torque hub nuts to 80 ft.lbs. (11.04 kg-m) and install
new cotter pin, bending one leg of cotter pin inward
and one outward against end of axle.
Polaris Industries Inc. 7.27
FINAL DRIVE
Rear Axle
7/96