Polaris Magnum 2x4 Service Manual page 507

TRANSMISSION SERVICE
Type IV, Shaft Drive Transmission
Shaft Drive Transmission Assembly, Cont.
38. 1996 Models - Compress and lock tensioner in
retracted position with a 1/8" drill bit. I nstall chain
tensioner in transmission.
1997 to Current Models -Install tensioner assembly
with spacers. Be sure spring is fully seated against
ratchet or cover may bind.
39. Clean tensioner bolts and housing threads with
Loctite™ Primer T, and apply Loctite™ 242 to chain
tensioner bolts.
40. Install drive gear and chain.
41. Pre-lubricate all bearings with Polaris Premium
Synthetic Gear Case Lubricant before installing
cover.
10/96
8.38
Polaris Industries Inc.