Polaris Magnum 2x4 Service Manual page 135

ENGINE
Engine Removal
Engine Removal Preparation, Cont.
23. Move top of engine to left until coolant supply hose
clamp clears frame at water pump fitting.
24. Lift and twist engine clockwise until lower left engine
mount stud is clear of frame mount and the lower right
coolant hose clamp clears frame tube.
25. Support engine in this position with a suitable support,
sucH as a board or a 2x4.
26. Place a drain pan beneath area to catch coolant.
27. Clamp coolant inlet hose leading from radiator to pump
to reduce coolant spillage.
28. Remove hose from water pump inlet and place in
container. Release clamp from hose and allow hose to
drain completely.
29. Lift back of engine while rotating front of engine
clockwise and remove engine from left side of frame.
7/96 3.10 Polaris Industries Inc.