6X6 Rear Brake Pad Replacement; 6X6 Rear Brake Pad Removal - Polaris Magnum 2x4 Service Manual

Removal
1. Clean caliper area before removing pads. Using a dull,
flat instrument between the old pads and brake disc,
slowly pry back the pads to push caliper piston into bore.
Be careful not to damage brake disc.
NOTE:Brake fluid will be forced through compensating
port into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.
2. Remove brake pad retaining pin. Do not open pin farther
than is necessary to remove the pin or pin tension may be
lost.
3. Measure the thickness of the pad material.
Replace pads if worn beyond the service limit.
4. Clean disc and caliper with brake cleaner or alcohol.
Polaris Industries Inc.
9.13
BRAKES
6x6 Rear Brake Pad Replacement
7/96