Swing Arm Removal/Inspection
14. On AWD models, remove auxiliary brake arm, middle
chain guard, middle chain, and sprockets.
15. Remove output shaft brake caliper and guard, circlip
and brake rotor.
16. Bend tab washers open and remove swing arm pivot
bolts.
NOTE:The left side swingarm bolt is shorter than the right.
17. Remove the swing arm.
Remove grease fittings
before pressing bushings and spacers out. Inspect
bushings, spacer, and pivot bolts for wear.
18. Note orientation of grease fittings for reassembly.
Polaris Industries Inc.
5.21
BODY AND STEERING
Swing Arm Removal/Inspection
7/96