Transmission Lubrication - Type V Shaft/Chain; Transmission Oil Change Procedure - Polaris Magnum 2x4 Service Manual

MAINTENANCE
Chassis Maintenance
5. Add Polaris Chaincase Oil through the dipstick hole.
Insert the dipstick all the way, remove, and check the
level on the stick. Add oil if necessary until the oil
level is between the upper and lower limits of the
knurled portion. Do not overfill.
:
',"'.
Rec()tnm~nded:Trar)smissi()nOH
1 ••••
·< :., • . • • , " • . , ••••••. • •• : • . . • • •
·.Ppl~r~~'§yrj~l)e\icg~~tcas~oil,
, ' ,
PN~a7147812:oz~1 PN2~11477.Galion
. '
Hi~h[L:o\ll!Rey,.r~rl~mi~!i§Il .. ~O()z
..• ,
Hig,h/Rev~
..
~~T~~n$mi,~$i9ni~ ·16()~
.
. ·
Sn:~~ pri\l:~Jrtln~.mi~~i<)n~
. ,
ApPP)"g()~~~·q~~(f'tc
...
Eln9~>
32
()~.:(Wl'1enc:;()mplet~lYdi.~§~ell'lblecO
Transmission Lubrication - Type V Shaft/Chain
The transmission fill plug is located on the right side of the
machine behind the propshaft shield.
The transmission lubricant level should be checked every
six months or 1000 miles (1600 km), whichever comes
first. Transmission oil should be changed annually. With
the ATV on a level surface, remove fill plug and check the
lubricant level. Lubricant level is correct when it reaches
the bottom'thread of filler hole. Use Polaris Premium Syn-
thetic Gearcase Lubricant (PN 2871478).
Transmission Oil Change Procedure
1. Remove propshaft shield from the right side of the
vehicle.
2. Remove fill plug.
3. Remove transmission drain plug located on the bot-
tom left hand side and drain the oil. Catch and discard
used oil properly.
4. Clean and reinstall the drain plug.
5. Add Polaris Premium Synthetic Gearcase Lubricant
(PN 2871478 12 oz. bottle) until oil reaches the bot-
tom thread of the filler hole.
6. Check for leaks.
7. Reinstall propshaft shield removed in step 1.
5/98
2.42
Full-__
~
Operating
Range
Transmission Fill
} Operating
Range
Polaris Industries Inc.