Fuel Tank / Pump / Sendor; Fuel Tank Assembly View; Fuel Tank Removal - Polaris RANGER 500 2018 Service Manual

Hide thumbs Also See for RANGER 500 2018:

Table of Contents

FUEL TANK / PUMP / SENDOR

1: 75 ft-lbs (92 Nm)

9928485 R01 - 2017-2018 RANGER 500 / 570 Service Manual

Fuel is extremely flammable and may cause severe

burns, injury, or death.

Do not use any device that produces a flame or

electrical devices that may spark around fuel or fuel

1. Lift the rear cargo box

2. Remove the seat from the vehicle.

3. Disconnect the negative (-), and then positive (+)

battery cables from the battery.

4. While holding a shop towel over the fuel line

connector, disconnect the quick connect fuel line from

the fuel pump

. Move the fuel line out of the way for

tank removal.

A small amount of fuel may come out of the fuel line or

tank. Properly drain fuel into a suitable container.

5. Disconnect the fuel pump electrical harness

6. Remove the fuel vent line from the tank vent fitting.

7. Remove the fuel cap, push rivets and screws

retaining the RH fender panel and remove panel from

the vehicle. See Floor and Fenders, page

Table of Contents