Throttle Cable Lubrication - Polaris Magnum 2x4 Service Manual

Exhaust Valve Clearance Adjustment Cont.
7. Reinstall the cover using a new gasket.
8. Torque cover bolts to 72 in. Ibs.
9. Remove the shop towel from the spark plug cavity.
10. Reinstall the spark plug. Torque to 11 ft. Ibs. (new), 18
ft. Ibs. (used).
11. Reinstall the spark plug high tension lead.
12. Reinstall the fuel tank.
13. Reinstall the fuel tank shroud.
14. Reinstall the left and right body panels.
Throttle Cable Lubrication
Lubricate throttle cable from the throttle block end.
1. Turn engine off.
2. Remove three throttle block cover screws.
3. Slide boot off throttle cable adjuster and jam nut.
4. Loosen cable adjuster jam nut.
5. Turn adjuster in to obtain maximum cable freeplay.
6. Open throttle and hold cable.
MAINTENANCE
4 Stroke Engine Maintenance
7. Carefully disconnect throttle cable from throttle lever. Do not kink or bend throttle cable.
8. Unscrew adjuster and remove cable.
9. Hold throttle cable up and lubricate with Polaris Cable Lube.
10. Turn adjuster in to obtain maximum cable freeplay.
11. Reinstall cable onto throttle lever.
12. Perform throttle cable adjustment.
Polaris Industries Inc. 2.29
10/96