Front Gearcase Lubrication; Gearcase Lubricant Change - Polaris Magnum 2x4 Service Manual

Polaris atv and light utility vehicle service manual
Table of Contents

Advertisement

MAINTENANCE
Front Gearcase Lubrication .. Type IV Transmission (Shaft Drive)
Front Gearcase Lubrication
The front gearcase fill plug is located on the right side
of the machine.
The gearcase lubricant level should be checked every
six months or 1000 miles (1600 km), whichever comes
first. Change front gearcase lubricant annually or at
100 hour intervals, whichever comes first. With the
ATV on a level surface, remove fill plug and check the
lubricant level. Lubricant should be kept at the bottom
of the fill hole threads. The correct gearcase lubricant
to use is GLS 80-90 Gear Lube.
Front
Gearcase
Lubricant
PN2871653
Gearcase Lubricant Change
1. Remove fill plug.
2. Remove gearcase drain plug located on the bottom
right hand side and drain the oil. Catch and discard
used oil properly.
3. Clean and reinstall the drain plug using a new seal-
ing washer.
4. Add GLS 80-90W Gear Lube to bottom of fill hole
threads.
5. Install fill plug.
6. Check for leaks.
7. Make sure vent hose is clear and free of kinks.
5/98
2.10
Make sure vent is unobstructed
Polaris Industries Inc.

Advertisement

Table of Contents
loading

Table of Contents