Polaris Magnum 2x4 Service Manual page 560

Headlight Lamp Replacement (Gen II)
1 a.Carefully unplug the socket from the lamp. Remove the
panel and set it aside.
CAUTION: Do not service while headlight is hot. Serious
burns may result.
11. Stand the panel containing the headlight assembly on
end to allow access to the back of the headlight assem-
bly.
12. Disengage the wire bail holding the headlight lamp in
place and move it out of the way.
13.Grasp the base of the lamp and lift it out.
14. Reverse the previous steps to replace the lamp and
reassemble the panels.
NOTE: Do not touch a halogen lamp with bare fingers. Oil
from your skin leaves a residue, causing a hot spot which
will shorten the life of the lamp. Hold the lamp by the base.
Polaris Industries Inc.
10.5
ELECTRICAL
Headlamp Service - Gen II
7/96