1997 (Late) - Current Tensioner Installation - Polaris Magnum 2x4 Service Manual

1997 (Late) - Current Tensioner Installation
Tensioner Assembly
With chain and sprockets installed:
1. Place spacers in case.
2. Place tensioner cam on front spacer and
tensioner shoe on rear spacer.
3. Insert pins through cam and washer, and through
shoe and washer.
4. Place spring
over
front pin and hook spring leg under cam.
5. Lift leg of spring up and over the rear pin. Tensioner cam
will lift shoe and tension chain.
TRANSMISSION SERVICE
Chain Tensioner Installation
~ard
Tensioner
Lock Cam
Spacers
View From Left Side of Transmission
II
Forward
5/98 8.29b
\ Lift
Spring Over Rear Mounting Pin
Hook Spring Leg Under Cam
Polaris Industries Inc.