Scan Operation; Speech Function - Icom ID-31E PLUS Basic Manual

■ Scan fpeoatifn
Scanning is a versatile function that can automatically
search for signals. A scan makes it easier to locate stations
to contact or listen to, or to skip unwanted channels or
frequencies.
This section describes the basic scan operation. See
Section 8 of ADVANCED MANUAL for details.
Example: Scanning in the VFO mode
1. Push [V/MHz] to enter the VFO mode.
2. Hold down [SCAN] for 1 second.
• Opens the Scan Type Select window.
3. Select "ALL."
• The scan starts.
• The decimal point and the selected scan type icon blink.
Blinks
L When receiving a signal, the S-meter displays the received
signal strength.
4. Push [CLR].
• Cancels the scan.
Blinks
■ Speech nunctifn
The Speech function audibly announces information after
holding down [QUICK]. Also, you can set various Speech
functions, such as the DIAL Speech function or Mode
Speech function in the MENU screen.
(MENU > SPEECH > DIAL SPEECH)
(MENU > SPEECH > MODE SPEECH)
Innforatifn
L
• In the VFO, Memory, or Call Channel mode, the Speech
function announces the displayed frequency and operating
mode.
• When using the DR function, the Speech function
announces the displayed call sign.
• When you push [QUICK] while recording a receive audio
in the DV mode, the received audio will be muted, and no
audio is recorded onto the microSD card. In modes other
than the DV mode, the received audio will be recorded.
BASIC OPERATION
Four, four, five, point,
one, zero,
megahertz, FM.
BASIC MANUAL
3
3
16