Upper Paper Guide L/R / Pe Sensor - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.4.19 Upper Paper Guide L/R / PE Sensor

The Main Frame becomes unstable once it is removed from the
Base Frame. Be careful not to deform the frame during
performing the following procedures.
◼ Refer to
4.2.4.11 Main Frame (p144)
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame/Printhead/CR Scale/Carriage Unit/Ink System/Transmission Holder
Assy/Front Frame/Rear Frame/Lower Paper Guide Waste Ink Pad Assy
Removal procedure
Be careful not to touch or damage the roller of the Upper Paper
Guide L/R, or it can adversely affect print quality.
Upper Paper Guide L
1. Release the hooks (x2) of the Main Frame, and remove the Upper Paper
Guide L in the direction of the arrow.
Rear side
Upper Paper Guide R
Figure 4-147. Removing the Left Paper Guide
DISASSEMBLY/ASSEMBLY
for the Parts/Components
Hook
Disassembly Procedures
https://www.manualsbooks.com
Upper Paper Guide R/PE Sensor
Remove the screw (x1) that secures the Sub Transmission Cam Holder and
1.
remove the Sub Transmission Cam Holder.
Right side
Sub Transmission Cam Holder
Figure 4-148. Removing the Upper Paper Guide R/PE Sensor
2. Disconnect the PE Sensor cable from the connector. (See
Remove the screw (x1) that secures the PE Sensor, and remove the PE Sensor
3.
avoiding the damage to the Upper Paper Guide sheet.
PE Sensor
PE Sensor cable
Connector
Figure 4-149. Removing the PE Sensor
Revision C
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
Fig. 4-149.)
Upper Paper Guide sheet
Positioning hole & dowel
C.B.P. 3x6 (6±1Kgfcm)
161
Confidential