Table of Contents
Advertisement
User's Guide
Paper Does Not Feed Correctly
Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a flat surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
Related Information
"Environmental Specifications" on page 106
&
"Available Paper and Capacities" on page 21
&
"Paper Handling Precautions" on page 20
&
"List of Paper Types" on page 21
&
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
Related Information
"Removing Jammed Paper" on page 88
&
"Loading Paper in the Rear Paper Feed" on page 22
&
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 22
&
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
No Paper Feeds
Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load above
the line indicated by the triangle symbol on the edge guide.
Solving Problems
91
Advertisement
Table of Contents
