Chapter 5: Individual Command Specifications; Exit Packet Mode - Epson XP-410 Programming Manual

4 color ink jet printer

Hide thumbs Also See for XP-410:

Table of Contents

CHAPTER 5: INDIVIDUAL COMMAND SPECIFICATIONS

00H 00H 00H ESC 01H "@EJL" 20H "1284.4" 0AH "@EJL" 20H 20H 20H 20H 20H 0AH

[Name]

[Format]

[Range of Definition]

[Function]

[Initial State]

[Related Commands]

Revision: 1

EPSON packet mode exit command (special command)

00H,00H,00H,1BH,01H,40H,45H,4AH,4CH,20H,31H,32H,38H,34H,2EH,34H,0AH,

40H,45H4AH,4CH,20H,20H,20H,20H,20H,0AH

---

1) If the system is in packet mode, this command must be sent before any other commands can

be successfully transferred over either USB or Parallel Port, including the basic ESC @

printer initialization command.

2) Packet communication protocol (EPSON packet mode) is cancelled.

The command for entering packet mode and the commands utilized in packet mode are

EPSON proprietary.

The initial state of the printer, unused and unopened, new from the EPSON box, may or may

not be in packet mode. However, once the printer has received any print job from any

other source (especially a Windows OS printer driver) it will most likely be in packet mode.

If the printer is in EPSON packet mode; no typical USB and possibly Parallel Port

transmissions can be received or recognized.

---

Ver 1.00

[Setting]

2013/12/18

Page: 26

Table of Contents