NEC Univerge SV8100 Features And Specifications Manual page 472

Issue 12.0
Transferred calls on DISA, DID, DIL, ISDN trunks, or from the VRS can display the reason

a call is being transferred (Call Forward, Busy, No Answer, or DND).
When defining trunks as DID or DID Mode in Program 22-02-01, DID translation (Program

22-11 or Program 22-17) must be used, even if the incoming digits match the extension
number.
When using DID Call by Time Schedule and breaking out the Time Patterns, set the start

time to 00:00 and end time to 00:00 for this feature to operate correctly. Refer to
by Time Schedule on page 2-437
DID Call by Time Schedule Priority is given to the pattern that is set manually. However,

when a time pattern changes with the time schedules set in Program 22-17, the pattern
applied by the Manual change is canceled and the Time Pattern is given priority
When Transfer Operation Mode is set to busy, call queuing must be turned off for it to work.

Incoming calls on T1/ANI trunks can only follow Program 22-11-01. They do not follow

Programs 22-11-05 and 22-11-06.
When a name is assigned to a DID in Program 22-11-03, the name is displayed during a

ringing DID call. When the call is transferred or forwarded, the name is not displayed until
the call is answered.
Default Setting
Disabled
Related Features
Central Office Calls, Answering
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Off-Hook Signaling
Paging, External
Programmable Function Keys
Station Message Detail Recording
Transfer
2 - 442
for more details.
UNIVERGE SV8100
DID Call
.
Direct Inward Dialing (DID)