Understanding Your Detector
In order to minimize the length of this already lengthy manual, we are not going to
repeat information here that has already been covered elsewhere in the manual—and we
hope you agree this is a wise choice.
Please start at page 1 of the "Getting Started" section and read all the way through to
the end of the "Naming the Product" section on page 26. When you have finished
reading these sections you will know how to do the following.
•
Use the detector's display panel.
•
Navigate the detector's menus and sub-menus.
•
Set up global parameters for the detector.
•
Key in a name for your product.
The Next Step
Now that detour is over, welcome back! You are now ready to set up the specific
parameters you will need to run your gravity-feed application. Read on for more details.
Page 64
Thermo Scientific APEX User's Guide