Thermo Scientific APEX 100 User Manual page 58

d. Press the Go button to restart the full product calibration. If this setting is too
sensitive, the following screen appears—the low frequency/low gain option.
e. Low Frequency/Low Gain Option
Low Frequency, Low Gain
Please note that this change in gain will result in the R and X noise thresholds
being reduced by a factor of 4.
f. Press the Go button to restart the full product calibration. If this setting is still too
sensitive, the following warning screen appears. When this happens, please
contact Thermo Fisher Scientific—as described in the "Contacting Thermo Fisher
Scientific" section at the end of the manual.
g. Press the Back button to exit the calibration menu.
(continued...)
Page 58
Saturation
Thermo Scientific APEX User's Guide