Keying In the In-Feed Photo-Eye Distance
The in-feed photo-eye-to-detector distance must be set for the IXR function to work
properly. To set the in-feed photo-eye distance, do the following.
1) Take a tape measure and note the distance from the photo-eye (on the upstream or
"in-feed" side of the detector) to the in-feed side of the detector's search head.
2) Make sure the Main Menu is displayed.
Product Name
3) Navigate to the system and tools menu.
System and Tools
4) Press the Go button and navigate to page 3 of the system and tools menu.
System and Tools Page 3
5) Navigate to the photo-eye set-up menu.
PE Distance and Head Width
Page 374
Thermo Scientific APEX User's Guide