Changing the Current Product
To change the currently running product, make sure the current product name is
highlighted, as shown below. (Your screen will look different if IXR is enabled.)
Product Name
Navigate to the New Product
With the product name highlighted, press the right-navigation button to change to a
product with a higher product number; or press the left-navigation button to change to a
product with a lower product number. Note that the product name bar will flash while
you are choosing which product to change to—and some of the relevant product settings
will be displayed. In the example below, product 002 has been selected.
Product Name
Confirm the Product Change
Once you have selected the product you want to change to, press the Go button. The
product name-bar stops flashing to show you the product has changed. The APEX will
now apply the new product's settings. The product settings for the new product can now
be modified.
Page 60
Thermo Scientific APEX User's Guide