Reject-Totals Menu - Thermo Scientific APEX 100 User Manual

Reject-Totals Menu

The reject-totals menu allows you to assess at a glance, how many products have been
screened and how many rejects of all kinds (P+A+Q) have been made. In addition, the
reject-total function tells you how many rejects have been made in the following three
categories. (You may not be using the Quality Test and AuditCheck options, especially if
you are running a gravity-feed or pipeline application.)
• Number of contaminated products (P) rejected by the detector.
• Number of rejects (A) made by the AuditCheck function.
• Number of rejects (Q) made by the Quality Test function.
Reject Totals
Understanding the Reject-Totals Menu
The icons shown in this menu are as follows. (Note: The Xs show that both the
AuditCheck and Quality Test functions are disabled. In a real application, where the
AuditCheck and Quality Test functions have been enabled, the Xs shown here are
replaced by numbers—representing the number of rejects.)
Number of contaminated products (P) rejected by the detector.
Number of rejects (A) made by the AuditCheck function.
Top-left-side number = Total number of rejects (P+A+Q).
Top-right-side number = Total number of products assessed.
Bottom number = Number of rejects (Q) made by the Quality Test function.
Page 112 Thermo Scientific APEX User's Guide