Keying In the Distance to the Reject-2 Device
There are two parts to this menu, as shown below.
Part 1—Keying In the Distance or Delay
This is set up in exactly the same way as the reject-1 device. See page 44.
Reject 2 Distance/Delay
Part 2—Setting the Units of Measure
This is set up in exactly the same way as the reject-1 device. See the small screen shot
at the top of page 45 and the text at the bottom of page 44.
Reject 2 Distance/Delay
Units
Keying In the Signal Duration for the Reject-2 Device
This is set up in exactly the same way as the reject-1 device. See page 46.
Reject 2 Duration
Page 142
Thermo Scientific APEX User's Guide