Starting A Complete Product Calibration; Editing The Product Name; Main Sub-Menu - Thermo Scientific APEX 100 User Manual

Starting a Complete Product Calibration

For more information about doing a full product calibration, see the relevant section for
your particular application.
• Conveyor applications—see page 55.
• Gravity-feed applications—see page 73.
• Pipeline applications—see page 90.
• Pharmaceutical applications—see page 105.
Full Product Calibration

Editing the Product Name

See page 24.
Edit Product Name
Main Sub-Menu—Page 2
1) Start at the Main Menu.
Product Name
2) Press the Go button.
3) Navigate to page 2 of the detector's main sub-menu.
Product Shape and Flow
Page 116 Thermo Scientific APEX User's Guide