Thermo Scientific APEX 100 User Manual page 252

6) Press the Go button and the following screen appears. Notice that a check mark has
appeared in the passwords menu, which tells you that passwords have now been
activated for the detector.
Activate Passwords
7) Navigate to the Level 4 supervisor password-entry icon.
Edit Supervisor Password
8) Press the Go button and the keyboard screen reappears.
9) Key in a new supervisor password for yourself (anything but "SUPE"). You must key
in your new password twice, as follows.
a. Key in your new password, navigate to the exit-and-save key, and press the
Go button. (The display panel still shows the keyboard screen, but a second
key icon has appeared in the entry field.)
b. Key in your new password again, navigate to the exit-and-save key, and
press the Go button. The screen shown in step 7 above reappears.
Page 252 Thermo Scientific APEX User's Guide