Thermo Scientific APEX 100 User Manual page 55

Doing a Full-Product Calibration
Before doing a full-product calibration, it is best to set the frequency and gain settings to
high (as described in the section above).
To do a full-product calibration, follow the instructions below.
1) Make sure that the conveyor is turned on and uncontaminated product is passing
through the search head. (In the example below, we are monitoring jars of spaghetti
sauce.)
2) Highlight your product name in the Main Menu. (Your screen will look different if IXR
is enabled.)
Product Name
3) Press the Go button and page 1 of the product menu appears.
Product Calibrate and Name
(continued...)
Thermo Scientific APEX User's Guide Page 55