Thermo Scientific APEX 100 User Manual page 56

4) Press the right-navigation button to highlight the "Full Product Calibration" menu.
Full Product Calibration
The detector's auto-calibration function (as shown by the icons and check marks in the
screen above) is now ready to do the following.
• Learn the phase angle.
• Learn the detect level.
• Conduct an AuditCheck, if this optional hardware is installed on your APEX.
5) Press the Go button and the "Performing Full Learn" monitor screen appears.
Performing Full Learn
(continued...)
Page 56 Thermo Scientific APEX User's Guide