Setting Limits For Peak Signal And Phase Angle - Thermo Scientific APEX 100 User Manual

Setting Limits for Peak Signal and Phase Angle

This function allows you to set limits for the peak-signal and phase-angle values during
QA testing, and, when these test values exceed your prescribed limits, have the detector
provide a warning, alarm, or fault.
1) Make sure page 2 of the quality-test menu is highlighted.
QA Test – Timers and
Reject
2) Press the down-navigation button and page 3 of the quality-test menu appears.
QA Test – Warning, Alarm, Fault
The icons in this screen are as follows.
Icon Description
Peak-signal icon
Phase-angle icon
Warning icon
Alarm icon
Fault icon
For more information on warnings, alarms, and faults (WAFs), see page 214.
Page 204 Thermo Scientific APEX User's Guide