Setting Metric Or Imperial Units - Thermo Scientific APEX 100 User Manual

2) Press the Go button and an input screen appears.
Date, YYYY/MM/DD
3) Use the navigation buttons to key in the correct date. Make sure you key in four
digits for the year (YYYY), two digits for the number of the month (MM) and two
digits for the day (DD)—carefully following the convention of year/month/day.
In the example above, we set the following date: February 28, 2008. If you are used
to expressing dates using a different convention—such as 28 February, 2008—please
be careful keying in these numbers.
4) Press the Go button to save your setting and exit the menu.

Setting Metric or Imperial Units

See page 22.
Metric/Imperial Units
Page 178 Thermo Scientific APEX User's Guide