Printer Set-Up; Attaching A Printer To The Detector - Thermo Scientific APEX 100 User Manual

Printer Set-Up—Page 1
Before using the detector's print functions, you must first do the following.
• Attach a printer to the detector's COM port.
• Activate the printer.
It is also useful to do the following.
• Set the detector's time and date function.

Attaching a Printer to the Detector

Make sure the power to both your printer and the APEX is turned off. Then, connect your
printer to the detector's serial printer (COM) port—see the wiring diagram below.
Page 238 Thermo Scientific APEX User's Guide