Doing A Manual Qa Test - Thermo Scientific APEX 100 User Manual

Doing a Manual QA Test

This function allows you to do a manual quality test. However, for this manual-test
function to work, you must already have calibrated the detector, following the
instructions in the "Testing the Detector Using QA Test Samples" section above. In
addition, you must have three quality test samples ready to pass through the search
head.
Manual Test
1) Highlight the manual-test function.
2) Press the Go button and the following screen appears.
Pass QA Test packs in sequence
3) Pass your quality test samples through the search head.
4) The detector will exit the menu when the test is complete.
Thermo Scientific APEX User's Guide Page 203