Learning About Other WAFs
Please explore the remaining functions in the WAF menu using the navigation buttons to
familiarize yourself with the types of problem that can trigger a WAF. These include the
following types of problems, which are listed under the relevant page of the WAF menu.
WAF—Page 1
Page 1 of the WAFs menu looks like this.
Warnings, Alarms & Faults
The following WAFs are accessed from page 1.
•
The reject has not been confirmed.
•
The reject bin is full.
•
The in-feed photo-eye is blocked.
•
Excessive number of consecutive rejects.
Excess Rejects
This function allows you to set up a WAF (in this example, an alarm), when an
excessive number of consecutive rejects occur. (To key in parameters for the
excess rejects function, see page 4 of the WAF menu below.)
Thermo Scientific APEX User's Guide
Page 217