Activating Reject Suppression (Reject 1)
This function is normally used only in gravity-feed and pipeline applications. To
activate—or trigger—the reject-suppression process, do the following.
1) From the Main Menu navigate to the rejects menu.
Reject Totals
2) Press the Go button and page 1 of the rejects menu appears.
Reject 1...
3) Navigate to page 3 of the rejects menu.
Reject Suppression
4) Navigate to the reject-trigger function.
Suppression Reject Trigger
(continued...)
Thermo Scientific APEX User's Guide
Page 131