Saving Your TCP/IP Settings
Your settings will not be activated until you save your settings using the "Save" function.
1) Navigate to the save function and make sure it is highlighted.
Save Configuration
The flashing asterisks in the screen above indicate that, in this example, we have
changed the IP, subnet-mask, and gateway addresses.
2) Press the Go button. There is a one second software pause, during which time the
Modbus card is reset. The following screen then appears.
Modbus TCP/IP Configuration
Notice that the flashing asterisks have disappeared, indicating that all your TCP/IP
communication settings have been saved and are now active.
3) Press the Back button repeatedly to return to the Main Menu screen.
Thermo Scientific APEX User's Guide
Page 333