Configuring the TCP/IP Card
This section tells you how to install and configure your TCP/IP Modbus Communications
Card, and how to interpret the four status LEDs on the card.
Card Schematic
For most applications, here are the relevant parts of the Modbus TCP/IP Communications
Card.
Installing the TCP/IP Card
To mount your TCP/IP card on the APEX motherboard, do the following.
1) On the APEX motherboard, remove the HMI CPU (human-machine interface, central
processing unit) card.
2) Install the TCP/IP card on the APEX motherboard by connecting the card's application
connector to the detector's COMMS1 connector. Use the APEX Communication
Module Mounting Kit to secure the card to the APEX motherboard.
3) Reinstall the HMI CPU on the motherboard.
Page 342
Thermo Scientific APEX User's Guide